LUTZ Drum & Container Pumps
Pumps - Drum & Container (Metallic and
Non-Metallic)
LUTZ Pumps
LUTZ modular drum pumps are available in an extensive range of “pump tubes” and “motor head” configurations, with the design emphasis on simplified field maintenance procedures. The pumping of chemicals from carboys and drums meet OSHA standards while streamlining your process. The portability and modular design of Lutz pumps allows for quick and easy mounting of motor heads to pump tubes for ensuring purity of storage vessels and preventing cross-contamination between liquids.
LUTZ pump configurations are available in various lengths, materials of construction, motor enclosures and power ratings for handling a wide range of chemicals, densities, viscosities at the required flows and heads within a given process by means of interchangeable impeller/rotor configurations. Whether the liquids are thin or extremely thick, the LUTZ design concept is to achieve light, convenient handling.
“Pump tube” materials of construction include PP, PVDF, AL, and 316-SS. The “motor head” designs are ODP, TEFC, UL-EXP and pneumatic (with or without locking triggers).
Metallic Pumps
Neutral Liquids
MMS-ALU Aluminum Pump Tube with Mechanical Seal
MSL-ALU Aluminum Seal-less Pump Tube
APPLICATIONS
The robust Lutz pump tube with mechanical seal or sealless is so designed that it can run dry; it is suitable for pumping non-aggressive, clean, thin-bodied and slightly viscous liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
STRUCTURE AND FUNCTION (MMS-ALU)
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump tube is sealed by a single-acting mechanical seal (MS) and two shaft seals located behind it, making a robust sealing system. The pump tube must not be allowed to run dry.
STRUCTURE AND FUNCTION (MSL-ALU)
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump tube is not sealed. The bearing housing unit above the impeller is designed to prevent pumped liquid from rising between the shaft and the inner tube. This device guides the liquid which penetrates between the drive shaft and the shaft bearing back into the container being drained.
LENGTH:
27", 39", 47"
Special length on request.
WARNING:
The drum and container pump must not be used for flammable liquids.
NOTE:
- Axial-flow rotor for high delivery rate and low delivery head. Radial-flow impeller for low delivery rate and high delivery head.
Metallic Pumps
Flammable & Aggressive Liquids
MMS-ALU Aluminum Pump Tube with Mechanical Seal
MSL-ALU Aluminum Seal-less Pump Tube
APPLICATIONS
The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive, flammable and nonflammable liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
STRUCTURE AND FUNCTION (MMS-SS)
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump tube is sealed by a single-acting mechanical seal (MS) and two shaft seals located behind it, making a robust sealing system. The pump tube must not be allowed to run dry.
STRUCTURE AND FUNCTION (MSL-SS)
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump is not sealed. The bearing housing insert above the impeller is designed to prevent the pumped liquid from rising between the shaft and the inner tube. This insert guides the liquid which penetrates between the drive shaft and the shaft bearing back into the container being drained.
LENGTH:
MMS/MSL: 27", 39", 47"
MSL only: 55", 59", 63", 67", 78"
Special length on request.
The pump tube is "Zone 0" approved in combination with the original Lutz motors Silver Star / MD-1 / MD-2 in accordance with standards for use in hazardous locations.
NOTE:
Axial-flow rotor for high delivery rate and low delivery head. Radial-flow impeller for low delivery rate and high delivery head.
See chart
Metallic Pumps
Complete drainage of highly toxic, expensive and sensitive liquids
RE-88 SS Stainless Steel Complete Drainage Pump Tube
APPLICATIONS
The pump tube RE-88 PP and RE-88 SS is designed to be used where drums or other containers have to be completely drained. The relatively small pump tube diameter of
41 mm also makes the unit ideal for use in narrow-necked containers or in drums with a 2" bunghole. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
STRUCTURE AND FUNCTION
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump is sealed by a single-acting mechanical seal (MS) above the impeller, making a robust sealing system. The pump tube must not be allowed to run dry.
LENGTH:
27", 39", 47"
Special length on request.
The pump tube is "Zone 0" approved in combination with the original Lutz motors Silver Star / MD-1 / MD-2 in accordance with standards for use in hazardous locations.
See Chart
Metallic Pumps
Mixing Pumps for corrosive and neutral liquids, emulsions, and suspensions
MP MS-SS Stainless Steel Mixing Pump with Mechanical Seal
APPLICATIONS
The Lutz mixing pump tube is designed to be used in any situation where it is necessary to mix and pump in a single operation. The relatively small pump tube diameter of 50 mm (Polypropylene) and 41 mm (Stainless Steel) also makes the unit ideal for use in narrow-necked containers or in drums with a 2" bunghole. The rate of flow, viscosity and density of the medium determine the mixing intensity and the delivery rate of the mixing pump tube. Experience has shown that the mixture quantity should preferably not exceed 55 Gallons if the medium is thin-bodied. The drive shaft of this pump tube is sealed by a single-acting mechanical seal (MS) above the impeller, making a robust sealing system. The pump tube must not be allowed to run dry. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
LENGTH:
39", 47"
Special length on request.
The mixing pump tube in Stainless Steel is "Zone 0" approved in combination with the original Lutz motors Silver Star / MD-1 / MD-2 in accordance with standards for use in hazardous locations.
See Chart
Metallic Pumps
Pumps for highly viscous liquids
B-70V-SR Progressive Cavity Pump Tube
APPLICATIONS
For applications in the food, pharmaceutical and cosmetics industry, no special shaft joint protection is needed.
PUMP TUBES
Pump tubes with different flow rates and length are available for the Lutz B70V-SR. The speed reducer is mounted directly on the pump tube. This reduces the relatively high speeds of the universal or compressed-air motors to a suitable speed for the pump tube of around 690 rpm. The pump tube, drive shaft and eccentric screw are made of Stainless Steel (316). Do not run dry or against closed valve.
Tube diameter: 54 mm (2.12")
Length: 1000 mm (39.4") or 1100 mm (43.3")
OPERATING DATA
Quantity: up to 13 GPM
Delivery head: up to 200 FT (87 PSI)
Temperature of medium: up to 284 °F
Viscosity: up to 50,000 cps (with MD-2 air motor)
ACCESSORIES
Bypass valves, hoses, hose clips, dosing devices, electronic flow meters, batch dosing appliance with time control and other accessories are available on request.
See Chart
Metallic Pumps
Universal drum and lab pump
B-2 SS Stainless Steal 115 V or Rechargeable (cordless)
UNIVERSAL APPLICATION
The Lutz B2 is an indispensible aid wherever liquids with a viscosity similar to that of water have to be filled, transferred, mixed or metered in small quantities, to or from drums, glass carboys, canisters and other vessels. Even narrownecked containers such as bottles or pistons present no problem. The rate of flow can be reduced or cut off as required. The "small but strong" B2 has proven highly successful in laboratories, chemical companies and chemists' shops. Versatile and inexpensive: The ideal starter model.
THE LUTZ B2 PUMP SERIES
The Lutz B2 pump series is made up of four models, all of which are ideally suited to the universal requirements of laboratory application. Each is supplied as a complete appliance consisting of a drive motor with fixed pump tube in Polypropylene (PP) or Stainless Steel (316).
FROM PUMP ONLY TO COMPLETE TOTALIZING SYSTEM, FOR SAFE AND ACCURATE TRANSFER
- Laboratory pump with hose connection
- Set: 5' (1,5 m) PVC-hose, PP nozzle, 2 hose clips, discharge spout, wall bracket.
Metallic Pumps
Extremely Corrosive Applications
SL-HC Hastelloy C Seal-less Pump Tube
APPLICATIONS
The robust Lutz pump tube is suitable for pumping nearly all kinds of liquids, whether extremely aggressive or flammable, clean or dirty, thin-bodied or slightly viscous out of drums and small or large containers
STRUCTURE AND FUNCTION (SL-HC)
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump is not sealed. The
bearing housing insert above the impeller is designed to prevent the pumped liquid from rising between the shaft and the inner tube. This insert guides the liquid which penetrates between the drive shaft and the shaft bearing back into the container being drained.
LENGTH:
39", 47"
Special length on request.
The pump tube is "Zone 0" approved in combination with the original Lutz motors Silver Star / MD-1 /
MD-2 in accordance with standards for use in hazardous locations.
Non-Metallic Pumps
Acids and alkalis
MMS-PP Polypropylene Pump Tube with Mechanical Seal
MSL-PP Polypropylene Seal-less Pump Tube
The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
STRUCTURE AND FUNCTION (MMS-PP)
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump tube is sealed by a single-acting mechanical seal (MS). The patented mechanical seal is integral with the lower bearing housing. This position guarantees the best operating conditions and ensures the long service life of the mechanical seal. The pump must not be allowed to run dry.
STRUCTURE AND FUNCTION (MSL-PP)
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump tube is not sealed. The bearing housing unit above the impeller is designed to prevent pumped liquid from rising between the shaft and the inner tube. This device guides the liquid which penetrates between the drive shaft and the shaft bearing back into the container being drained.
LENGTH:
MMS/MSL: 27", 39", 47"
MSL only: 55", 59", 63", 67", 78"
Special length on request.
Non-Metallic Pumps
Complete drainage of highly toxic, expensive and sensitive liquids
RE 88 Polypropylene Complete Drainage Pump Tube
APPLICATIONS
The pump tube RE-88 PP and RE-88 SS is designed to be used where drums or other containers have to be completely drained. The relatively small pump tube diameter of
41 mm also makes the unit ideal for use in narrow-necked containers or in drums with a 2" bunghole. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
STRUCTURE AND FUNCTION
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump is sealed by a single-acting mechanical seal (MS) above the impeller, making a robust sealing system. The pump tube must not be allowed to run dry.
LENGTH:
27", 39", 47"
Special length on request.
The pump tube is "Zone 0" approved in combination with the original Lutz motors Silver Star / MD-1 / MD-2 in accordance with standards for use in hazardous locations.
WARNING:
The RE 88 Polypropylene pump must not be used for flammable liquids.
Non-Metallic Pumps
Mixing pumps for corrosive and neutral liquids, emulsions, & suspensions
MP MS-PP Polypropylene Mixing Pump with Mechanical Seal
MP SL-PP Polypropylene Seal-less Mixing Pump
APPLICATIONS
The Lutz mixing pump tube is designed to be used in any situation where it is necessary to mix and pump in a single operation. The relatively small pump tube diameter of 50 mm (Polypropylene) and 41 mm (Stainless Steel) also makes the unit ideal for use in narrow-necked containers or in drums with a 2" bunghole. The rate of flow, viscosity and density of the medium determine the mixing intensity and the delivery rate of the mixing pump tube. Experience has shown that the mixture quantity should preferably not exceed 55 Gallons if the medium is thin-bodied. The drive shaft of this pump tube is sealed by a single-acting mechanical seal (MS) above the impeller, making a robust sealing system. The pump tube must not be allowed to run dry. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
LENGTH:
39", 47"
Special length on request.
The mixing pump tube in Stainless Steel is "Zone 0" approved in combination with the original Lutz motors Silver Star / MD-1 / MD-2 in accordance with standards for use in hazardous locations.
WARNING:
The mixing pump tube in Polypropylene (PP) must not be used for flammable liquids.
Non-Metallic Pumps
Universal drum and laboratory pump
B-2 PP Polypropylene 115 V or Rechargeable (cordless)
UNIVERSAL APPLICATION
The Lutz B2 is an indispensible aid wherever liquids with a viscosity similar to that of water have to be filled, transferred, mixed or metered in small quantities, to or from drums, glass carboys, canisters and other vessels. Even narrownecked containers such as bottles or pistons present no problem. The rate of flow can be reduced or cut off as required. The "small but strong" B2 has proven highly successful in laboratories, chemical companies and chemists' shops. Versatile and inexpensive: The ideal starter model.
THE LUTZ B2 PUMP SERIES
- The Lutz B2 pump series is made up of four models, all of which are ideally suited to the universal requirements of laboratory application. Each is supplied as a complete appliance consisting of a drive motor with fixed pump tube in Polypropylene (PP) or Stainless Steel (316).
From Pump only to complete totalizing system, for safe and accurate transfer.
- Laboratory pump with hose connection
- Set: 5' (1,5 m) PVC-hose, PP nozzle, 2 hose clips, discharge spout, wall bracket.
Non-Metallic Pumps
Pumps for concentrated liquids
MMS-PVDF PVDF Pump Tube with Mechanical Seal
MSL-PVDF PVDF Seal-less Pump Tube
APPLICATIONS
The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
STRUCTURE AND FUNCTION (MMS-PVDF)
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump tube is sealed by a single-acting mechanical seal (MS). The patented mechanical seal is integral with the lower bearing housing. This position guarantees the best operating conditions and ensures the long service life of the mechanical seal. The pump must not be allowed to run dry.
STRUCTURE AND FUNCTION (MSL-PVDF)
Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump tube is not sealed. The bearing housing unit above the impeller is designed to prevent pumped liquid from rising between the shaft and the inner tube. This device guides the liquid which penetrates between the drive shaft and the shaft bearing back into the container being drained.
LENGTH:
27", 39", 47"
Special length on request.
WARNING:
The drum and container pump must not be used for flammable liquids.
NOTE:
- Axial-flow rotor for high delivery rate and low delivery head. Radial-flow impeller for low delivery rate and high delivery head.
