Home Product LinesPumpsLUTZ Drum and Container PumpsNon-Metallic PumpsPumps for Concentrated Liquids

Pumps for Concentrated Liquids


MMS-PVDF    PVDF Pump Tube with Mechanical Seal
MSL-PVDF     PVDF Seal-less Pump Tube


Applications

The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.

Structure and function (MMS-PVDF)

Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump tube is sealed by a single-acting mechanical seal (MS). The patented mechanical seal is integral with the lower bearing housing. This position guarantees the best operating conditions and ensures the long service life of the mechanical seal. The pump must not be allowed to run dry.

Structure and function (MSL-PVDF)

Lutz pump tubes are immersible centrifugal pumps. The drive shaft of this pump tube is not sealed. The bearing housing unit above the impeller is designed to prevent pumped liquid from rising between the shaft and the inner tube. This device guides the liquid which penetrates between the drive shaft and the shaft bearing back into the container being drained.

Length:

27", 39", 47"
Special length on request.

Warning:

The drum and container pump must not be used for flammable liquids.

Note:

Axial-flow rotor for high delivery rate and low delivery head. Radial-flow impeller for low delivery rate and high delivery head.

Type

MMS-PVDF (Mechanical Seal)

MSL-PVDF (Sealless)

Wetted parts

 

 

Housing:

PVDF

PVDF

Mechanical seal:

Carbon, SiC, Viton®, HC-4 (2.4610)

None

Bearings:

PTFE

PTFE

Drive shaft:

HC-4 (2.4610)

HC-4 (2.4610)

Examples of liquids:

Highly concentrated Acids and Alkalis, Ethyl Chloride, Chloroform, Chromic Acid, Phosphoric Acid 95%, Perchloric Acid, Sulphuric Acid, Chlorine Water etc.

Highly concentrated Acids and Alkalis, Bromic Acid, Hydrobromic Acid, Chloroform, Dimethyl Phthalate, Hydrofluoric Acid, Potassium Bromate, Sodium Perchlorate, Phosphoric Acid 95%, Nitric Acid etc.

Type of impeller:

axial-flow rotor (R) or radial-flow impeller (L)

Material: ETFE

axial-flow rotor (R) or radial-flow impeller (L)

Material: ETFE

 

Motors available: