Home Product LinesPumpsFLUX PUMPSFLUX High Viscosity Liquid PumpsTYPE F 550 S

TYPE F 550 S

For low to high viscosity, pasty, but still free flowing products

Features and benefits:

recommended for low to high viscosity, pasty, but still free flowing products
  • eccentric worm-drive pump with bearing flange in aluminium
  • with mechanical seal or stuffing box
  • low wear due to low pump speed
  • vertical and horizontal use
  • outer diameter of pump tube 50 or 54 mm
  • Type F 550 SX.-50/21 for use in Zone 0, tested and certified according to Directive 94/9/EC - ATEX 100a, EC-Type-Examination Certificate No. PTB 99 ATEX 4050/4051 X

Positive displacement pump - eccentric worm type:

  • smooth pumping with very little turbulences
  • low wear, no valves, vanes etc.
  • vertical and horizontal use

The pump is available in:

  • Pump: stainless steel 316 L / 316 Ti (S)
  • Stator: PTFE, NBR, CSM, FKM

Immersion lengths:

  • 700, 1000 and 1200 mm (other lengths on request)
Performance data
Delivery rate max. 50 l/min
Delivery head max. 8 bar
Viscosity: pasty
The delivery rate depends on the velocity of the fluid.

Available drive motors:

  • Three-phase motor 0,75 or 1,1kW, 930 or 700 min-1, jet-proof to IP 55 or explosion-proof to ATEX 100a
  • Air motor 0,5 - 1,8 kW, 1000 min-1 at 6 bar, explosion-proof to ATEX 100a