Flux Pumps

Pumps - Drum and Container Pumps | High Viscosity Liquid Pumps

Flux Pumps

FLUX Drum & Container Pumps are the benchmark for durable, long-lasting portable transfer pumps. They meet a wide variety of process requirements including pumping out 55 gallon drums or even 500-1000 gallon tote tank transfer. Interchangeable high flow or high head impellers deliver precise flows and head pressures. The inherent strength and rigidity of FLUX pumps offers high reliability even with built-to-spec extended length pumps. The highly engineered internal shaft design incorporates proper bearing spans that are critical for achieving long life in high speed vertical pumps. 

An extensive range of constructional materials are available for the wetted “tubesets” including polypropylene (PP), polyvinylidene fluoride (PVDF), stainless steel (AISI-316), aluminum (AL), and hastelloy-C276. “Motor heads” are available in non-metallic ODP, heavy duty alloy TEFC, EXP, or pneumatic (with or without locking triggers).

Type F 424 Sealless

Sealless in the liquid section

FEATURES AND BENEFITS:

  • particularly suitable for transferring solvents and other fluids that do not glue, nor crystallize
  • safe dry running of the drum pump
  • no wear on seals inner tube and helix shaped support bearings completely self-draining - thus
  • preventing from any mixtures of liquids being pumped.
  • no contamination of the liquid being pumped by shaft lubricants
  • optimum barrel emptying due to ideal impellor design
  • to be stripped for cleaning with a minimum of effort
  • version in stainless steel tested and certified according to Directive 94/9/EC-ATEX 100a,
  • category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4108 X


THE PUMP IS AVAILABLE IN:

  • stainless steel 316 L / 316 Ti (S)
  • Polypropylene (PP)
  • Polyvinylidenfluoride (PVDF)


IMMERSION LENGTHS:

  • 700, 1000, 1200, 1500mm (other lengths on request)

Performance data
obtained with water at 20 °C at the pump outlet
Delivery rate max. 220 l/min
Delivery head max. 30 m WS
Temperature max. 100 °C 

Drum and Container Pumps

Type F 425

Barrel emptying up to 99.98%

FEATURES AND BENEFITS:

  • remains of less than 0,05 l
  • especially recommended for high-grade fluids (like e.g. used in cosmetic industry)
  • optimum use of the liquid in barrel emptying, thus avoiding expenditures nd/or cost in
  • disposal
  • ease of handling
  • to be stripped for cleaning with a minimum of effort
  • version in stainless steel tested and certified according to Directive 94/9/EC-ATEX 100a,
  • category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4001 X

THE PUMP IS AVAILABLE IN:

  • stainless steel 316 L / 316 Ti (S)
  • Polypropylene (PP)

IMMERSION LENGTHS:

700, 1000, 1200, 1500 MM (OTHER LENGTHS ON REQUEST)

Performance data
obtained with water at 20 °C at the pump outlet
Delivery rate max. 120 l/min
Delivery head max. 12 m WS
Temperature max. 100 °C 

Drum and Container Pumps

Type F 427

Sanitary version for aseptic applications

FEATURES AND BENEFITS:

  • all wetted parts are made of stainless steel, ETFE or PTFE
  • to be stripped for cleaning and/or sterilization with a minimum of effort
  • no contamination of the liquid being pumped by shaft lubricants
  • optimum barrel emptying due to ideal impellor design
  • also available in 3A version

THE PUMP IS AVAILABLE IN:

  • stainless steel 316 L / 316 Ti (S)

IMMERSION LENGTHS:

  • 700, 1000 and 1200 mm

Performance data
obtained with water at 20 °C at the pump outlet
Delivery rate max. 240 l/min
Delivery head max. 13 m WS
Temperature max. 100 °C 

Drum and Container Pumps

Type F 430

With mechanical seal

FEATURES AND BENEFITS:

  • unique barrel pump design in PP and PVDF throughout the world: a steel cored inner tube provides the ultimate in stability and extended service life of the mechanical seal - even at high temperatures
  • sealed inner tube, the liquid being pumped cannot enter the inner tube 
  • suitable for transferring almost every low viscosity fluid 
  • optimum barrel emptying due to ideal impellor design 
  • to be stripped for cleaning with a minimum of effort 
  • version in stainless steel and Hastelloy C tested and certified according to Directive 94/9/EC-ATEX 100a, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4110 X 

THE PUMP IS AVAILABLE IN:

  • stainless steel 316 L / 316 Ti (S) 
  • Hastelloy C (HC) 
  • aluminium alloy (AL) 
  • Polypropylene (PP) 
  • Polyvinylidenfluoride (PVDF) 

IMMERSION LENGTHS:

  • 500, 700, 1000, 1200, 1500, 1800, 2000, 2500, 3000 mm (other lengths on request)

Performance data
obtained with water at 20 °C at the pump outlet
Delivery rate max. 240 l/min
Delivery head max. 30 m WS
Temperature max. 120 °C

Drum and Container Pumps

Type F 430 PP/100-50

For transferring chemicals out of larger containers

FEATURES AND BENEFITS:

  • powerful, extremely light and handy pump
  • particularly suitable for emptying 1000-Litre-Containers
  • no floor drains, minimizing leakage risks
  • The pump is available in:
  • Polypropylene (PP)

IMMERSION LENGTHS:

  • 1000, 1200 and 1500 mm

Performance data
obtained with water at 20 °C at the pump outlet
Delivery rate max. 105 l/min
Delivery head max. 32 m WS
Temperature max. 50 °C 

Drum and Container Pumps

High Viscosity Liquid Pumps
Type F 430 PP/100-50

For low to high viscosity, pasty, but still free flowing products

FEATURES AND BENEFITS:

Recommended for low to high viscosity, pasty, but still free flowing products eccentric worm-drive pump with bearing flange in aluminum

  • with mechanical seal or stuffing box
  • low wear due to low pump speed
  • vertical and horizontal use
  • outer diameter of pump tube 50 or 54 mm
  • Type F 550 SX.-50/21 for use in Zone 0, tested and certified according to Directive 94/9/EC - ATEX 100a, EC-Type Examination Certificate No. PTB 99 ATEX 4050/4051 X

POSITIVE DISPLACEMENT PUMP - ECCENTRIC WORM TYPE:

  • smooth pumping with very little turbulences
  • low wear, no valves, vanes etc.
  • vertical and horizontal use

THE PUMP IS AVAILABLE IN:

  • Pump: stainless steel 316 L / 316 Ti (S)
  • Stator: PTFE, NBR, CSM, FKM

IMMERSION LENGTHS:

  • 700, 1000 and 1200 mm (other lengths on request)

Performance data
Delivery rate max. 50 l/min
Delivery head max. 8 bar
Viscosity: pasty
The delivery rate depends on the velocity of the fluid.

AVAILABLE DRIVE MOTORS:

  • Three-phase motor 0,75 or 1,1kW, 930 or 700 min-1, jet-proof to IP 55 or explosion-proof to ATEX 100a
  • Air motor 0,5 - 1,8 kW, 1000 min-1 at 6 bar, explosion-proof to ATEX 100a


Drum and Container Pumps

Type F 550 GS

For low to medium viscosity products, up to max. 30,000 mPas (cP)

FEATURES AND BENEFITS:

  • recommended for low to medium viscosity products, up to max. 30.000 mPas (cP)
  • lightweight and easy-to-handle eccentric worm-drive pump with planetary gear
  • with mechanical seal or stuffing box
  • low wear due to low pump speed
  • low weight of complete pump and motor unit
  • outer diameter of pump tube 50 or 54 mm
  • Type F 550 GSX.-50/21 for use in Zone 0, tested and certified according to Directive 94/9/EC - ATEX 100a, EC-Type-Examination Certificate No. PTB 99 ATEX 4050/4051 X

POSITIVE DISPLACEMENT PUMP - ECCENTRIC WORM TYPE

  • smooth pumping with very little turbulences
  • low wear, no valves, vanes etc.

THE PUMP IS AVAILABLE IN:

  • Pump: stainless steel 316 L / 316 Ti (S)
  • Stator: PTFE, NBR, CSM, FKM

IMMERSION LENGTHS:

700, 1000 and 1200 mm (other lengths on request)

Performance data
Delivery rate max. 50 l/min
Delivery head max. 8 bar
Viscosity max. 30.000 mPas (cP)
The delivery rate depends on the velocity of the fluid. 

Drum and Container Pumps High Viscosity

Type F 550 GS6

For viscous products up to max. 80,000 mPas (cP)

FEATURES AND BENEFITS:

  • recommended for viscous products up to max. 80.000 mPas (cP)
  • lightweight and easy-to-handle eccentric worm-drive pump with planetary gear
  • extremely smooth transfer operations with a speed of 210 min-1 or 420 min-1 only
  • with mechanical seal
  • outer diameter of pump tube 50 or 54 mm

POSITIVE DISPLACEMENT PUMP - ECCENTRIC WORM TYPE

  • smooth pumping with very little turbulences
  • low wear, no valves, vanes etc.

THE PUMP IS AVAILABLE IN:

  • Pump: stainless steel 316 L / 316 Ti (S)
  • Stator: PTFE, NBR, CSM, FKM

IMMERSION LENGTHS:

  • 700, 1000 and 1200 mm (other lengths on request)

Performance data
Delivery rate max. 20 l/min
Delivery head max. 8 bar
Viscosity max. 80.000 mPas (cP)
The delivery rate depends on the velocity of the fluid.

AVAILABLE DRIVE MOTORS:

  • Single-phase AC motor with capacitor switch Type F 403/2
  • 0,50 kW, 2850 min-1, jet-proof to IP 55
  • Single-phase AC motors with capacitor switch Type F 403/4
  • 0,30 or 0,55 kW, 1450 min-1, jet-proof to IP 55
  • Three-phase motor Type F 403/4, 0,55 kW, 1450 min-1, jet-proof to IP 55
  • Three-phase motor Type F 403/2, 0,75 kW, 2850 min-1, jet-proof to IP 55
Drum and Container Pumps High Viscosity

Viscoflux

Barrel emptying system for transferring high viscosity, pasty products & other sensitive applications

FEATURES AND BENEFITS:

  • allowing the transfer of high viscosity, pasty, non-flowing products,
  • like for example grease, ointment, paste, silicon, paint and varnishes,etc.
  • especially designed for use with 200-Litre-Barrels
  • smooth pumping by using gentle, progressive cavity pumping technology
  • compact construction with lifting handles for easy portability and quick assembly
  • fast strip down for cleaning or sterilization
  • flexible lip seal with tight fit to the inside of the barrel ensures an optimum barrel emptying
  • drive motors: three-phase or air motors in differing kW-ratings and speeds

FRAME-MOUNTED TOTAL PACKAGE INCLUDING:

  • guide cylinder with follower plate in stainless steel and clamp connection to the pump
  • flexible lip seal customized for barrel diameter
  • two hydraulic rams in aluminum for lifting the pump and follower plate after barrel emptying
  • pneumatic control unit for rams

Performance data
Delivery rate max. 40 l/min
The delivery rate depends on the velocity of the fluid. 

Drum and Container Pumps

Type F 520 S-50/45 with Bearing Flange

For viscous products up to max. 20,000 mPas (cP)

FEATURES AND BENEFITS:

  • recommended for viscous products up to max. 20.000 mPas
  • screw pump with bearing flange in aluminum
  • very robust pump design
  • with mechanical seal
  • can be operated against a closed outlet
  • outer diameter of pump tube 50 mm

HIGH VISCOSITY LIQUID PUMP - ARCHIMEDEAN SCREW TYPE

  • low wear, no valves, vanes etc.
  • easy to strip down
  • ideal for transferring free flowing fluids

THE PUMP IS AVAILABLE IN:

  • Pump: stainless steel 316 L / 316 Ti (S)
  • Stator: stainless steel 316 Ti (S)

IMMERSION LENGTHS:

  • 700, 1000 and 1200 mm
  • Performance data
  • Delivery rate max. 35 l/min
  • Delivery head max. 2 bar
  • Viscosity max. 20.000 mPas (cP)
  • The delivery rate depends on the velocity of the fluid

AVAILABLE DRIVE MOTORS:

  • Three-phase motors 0,75 - 3,0 kW, 2850 min-1, jet-proof to IP 55
  • Air motors 1,0 - 2,6 kW, 3000 min-1 at 6 bar, explosion-proof to ATEX 100a
Drum and Container Pumps
Share by: